Research Impact:
Associate Professor Dr Elango Natarajan
CEng
Associate Professor | Department of Mechanical Engineering
Academic Qualifications
Post Doctoral Research Soft Robotics
PhD Mechanical Engineering
MEng Computer Aided Design CAD
BEng Mechanical Engineering
Areas of Interest
- Senior Member, IEEE
- Secretary, IEEE/Robotics and Automation Society, Malaysia.
- Chartered Engineer, Engineering Council, UK.
- Professional Review Interviewer, IET, UK.
- Graduate Member, Board of Engineers, Malaysia.
I have secured research grants worth of RM 829,320, in which projects worth of RM 367,625 was successfully completed. Since I joined Â鶹´«Ã½Ó³», I have been successful in securing RM 506,820, in which RM 269,900 from Fundamental Research Grant Scheme, Ministry of Malaysia (2014-2022) and RM 236,920 from Â鶹´«Ã½Ó³» University Research Grant Schemes (2016-2022). I was unsuccessful in securing grants from Ministry of Malaysia for three times (2017-2022).
Successful grants since joined Â鶹´«Ã½Ó³» University
- Synthesis of High Strength Polyurethane Nano Composite for the development of Prosthetic Hand (Ref: YSIF-2015-000033) Grant amount RM 24,450. Academic year 2016-2018.
- Investigation on Machinability and Fatigue life of PEEK/CNF composite for Bone Plate Applications (Proj-In-FETBE-044) Grant amount RM 20,675 Academic year 2017-2019
- Investigation of finger musculoskeletal pinching motion using soft McKibben actuator with machine learning adaption (Ref: FRGS/1/2019/TK04/UTM/02/41) Grant amount RM 129,500, Role Co-Investigator. Academic year 2019-2022.
- A New Formulation of General Fuzzy Automata with Outputs Associated with the Transitions ¡¤ (FRGS/1/2019/STG06/UTHM/02/1) Grant amount RM 43,600, Role Member. Academic year 2019-2022.
- Investigations on structural integrity of PEEK/CNF for bone plating application (Ref: FRGS/1/2018/TK05/MAHSA/02/1) Grant amount RM 96,800, Role Co-Investigator. Academic year 2018-2021.
- Reduced Cutting Force, Surface Roughness and Tool Wear Prediction in Machining Titanium Alloy (REIG-FETBE-2022/018). Grant amount RM 46,800. Role Principal Investigator. Academic year 2022-2024.
- Mechanical and Electrical Resistivity Properties of Conductive Filler Reinforced with Devulcanizing Rubber/Polypropylene Blends (REIG-FETBE-2021/014) Role Co-Investigator. Grant amount RM 45,220. Academic year 2021-2023.
- Synthesize and characterization of ecofriendly MXene added bio-lubricants with enhanced properties (REIG-FETBE-2022/019) Grant amount RM 49,900. Role Co-Investigator. Academic year 2022-2024.
- Development of high-speed response AGV robot for project-based education purpose (REIG-FETBE-2022/022) Grant amount RM 49,875. Role Co-Investigator. Academic year 2022-2024.
1. Natarajan, E., Kaviarasan, V., Ang, K. M., Lim, W. H., Elango, S., & Tiang, S. S. (2022). Production wastage avoidance using modified multi-objective teaching learning based optimization embedded with refined learning scheme. IEEE Access, 10, 19186-19214. doi:10.1109/ACCESS.2022.3151088
2. Alrifaey, M., Lim, W. H., Ang, C. K., Natarajan, E., Solihin, M. I., Juhari, M. R. M., & Tiang, S. S. (2022). Hybrid deep learning model for fault detection and classification of grid-connected photovoltaic system. IEEE Access, 10, 13852-13869. doi:10.1109/ACCESS.2022.3140287
3. Kayaroganam, P., Krishnan, V., Natarajan, E., Natarajan, S., & Muthusamy, K. (2021). Drilling parameters analysis on in-situ al/b4 c/mica hybrid composite and an integrated optimization approach using fuzzy model and non-dominated sorting genetic algorithm. Metals, 11(12) doi:10.3390/met11122060
4. Velavan, K., Palanikumar, K., Natarajan, E., & Lim, W. H. (2021). Implications on the influence of mica on the mechanical properties of cast hybrid (Al+10%B4C+Mica) metal matrix composite. Journal of Materials Research and Technology, 10, 99-109. doi:10.1016/j.jmrt.2020.12.004
5. Natarajan, E., Kaviarasan, V., Lim, W. H., Tiang, S. S., Parasuraman, S., & Elango, S. (2020). Non-dominated sorting modified teaching¨Clearning-based optimization for multi-objective machining of polytetrafluoroethylene (PTFE). Journal of Intelligent Manufacturing, 31(4), 911-935. doi:10.1007/s10845-019-01486-9
6. Suresh, S., Elango, N., Venkatesan, K., Lim, W. H., Palanikumar, K., & Rajesh, S. (2020). Sustainable friction stir spot welding of 6061-T6 aluminium alloy using improved non-dominated sorting teaching learning algorithm. Journal of Materials Research and Technology, 9(5), 11650-11674. doi:10.1016/j.jmrt.2020.08.043
7. Sharon, H., Elamvazuthi, I., Lu, C. -., Parasuraman, S., & Natarajan, E. (2020). Development of rheumatoid arthritis classification from electronic image sensor using ensemble method. Sensors (Switzerland), 20(1) doi:10.3390/s20010167
8. Yu, L. -., Ahmad, S. H., Kong, I., Tarawneh, M. A., Abd Razak, S. B. B., Natarajan, E., & Ang, C. K. (2019). Magnetic, thermal stability and dynamic mechanical properties of beta isotactic polypropylene/natural rubber blends reinforced by NiZn ferrite nanoparticles. Defence Technology, 15(6), 958-963. doi:10.1016/j.dt.2019.03.001
9. Natarajan, E., Kaviarasan, V., Lim, W. H., Tiang, S. S., & Tan, T. H. (2018). Enhanced multi-objective teaching-learning-based optimization for machining of delrin. IEEE Access, 6, 51528-51546. doi:10.1109/ACCESS.2018.2869040
10. Lim, W. H., Isa, N. A. M., Tiang, S. S., Tan, T. H., Natarajan, E., Wong, C. H., & Tang, J. R. (2018). A self-adaptive topologically connected-based particle swarm optimization. IEEE Access, 6, 65347-65366. doi:10.1109/ACCESS.2018.2878805
11. Mohan, S., Raghavendran, H. B., Karunanithi, P., Murali, M. R., Naveen, S. V., Talebian, S., . . . Kamarul, T. (2017). Incorporation of human-platelet-derived growth factor-BB encapsulated poly(lactic-co-glycolic acid) microspheres into 3D CORAGRAF enhances osteogenic differentiation of mesenchymal stromal cells. ACS Applied Materials and Interfaces, 9(11), 9291-9303. doi:10.1021/acsami.6b13422
12. Leo, C. Y., Shamiri, A., Aroua, M. K., Aghamohammadi, N., Aramesh, R., Natarajan, E., . . . Akbari, V. (2016). Correlation and measurement of density and viscosity of aqueous mixtures of glycerol and N-methyldiethanolamine, monoethanolamine, piperazine and ionic liquid. Journal of Molecular Liquids, 221, 1155-1161. doi:10.1016/j.molliq.2016.06.103
13. Elango, N., & Faudzi, A. A. M. (2015). A review article: Investigations on soft materials for soft robot manipulations. International Journal of Advanced Manufacturing Technology, 80(5-8), 1027-1037. doi:10.1007/s00170-015-7085-3
14. Elango, N., & Marappan, R. (2011). Analysis on the fundamental deformation effect of a robot soft finger and its contact width during power grasping. International Journal of Advanced Manufacturing Technology, 52(5-8), 797-804. doi:10.1007/s00170-010-2747-7.
5. Kailasanathan, C. K., Saravanan, S. T., Natarajan, E., & Stalin, B. (2022). Polyoxymethylene/talc composite: Investigation of warpage, mechanical and thermal properties for thin walled-injection molding applications. Journal of Applied Polymer Science, 139(10) doi:10.1002/app.51762
16. Elango, S., Varadaraju, K., Natarajan, E., Abraham Gnanamuthu, E. M., Durairaj, R., & Mariappan, P. (2022). PTFE in wet and dry drilling: Two-tier modeling and optimization through ANFIS. Mathematical Problems in Engineering, 2022 doi:10.1155/2022/4812470
17. S, R., Palanikumar, K., Boppana, S. B., & Natarajan, E. (2022). Analysis of chip formation and temperature measurement in machining of titanium alloy (ti-6Al-4V). Experimental Techniques, doi:10.1007/s40799-021-00537-2
18. Prabhudass, J. M., Palanikumar, K., Natarajan, E., & Markandan, K. (2022). Enhanced thermal stability, mechanical properties and structural integrity of MWCNT filled Bamboo/Kenaf hybrid polymer nanocomposites. Materials, 15(2) doi:10.3390/ma15020506
19. Saravanan, S. T., Kailasanathan, C., Natarajan, E., & Ramasamy, A. (2021). Crystallinity change and reduced warpages on thin walled parts-the effect of nano fumed silica on polyacetal. Silicon, 13(12), 4611-4622. doi:10.1007/s12633-020-00796-5
20. Suresh, S., Venkatesan, K., Natarajan, E., & Rajesh, S. (2021). Performance analysis of nano silicon carbide reinforced swept friction stir spot weld joint in AA6061-T6 alloy. Silicon, 13(10), 3399-3412. doi:10.1007/s12633-020-00751-4
21. Tan, J., Natarajan, E., Lim, W., Ramesh, S., Ang, C., Parasuraman, S., & Singh, D. K. J. (2021). Effects of bone-plate materials on the healing process of fractured tibia bone under time-varying conditions: A finite element analysis. Materials Research Express, 8(9) doi:10.1088/2053-1591/ac24f8
22. Santhosh, M. S., Sasikumar, R., & Natarajan, E. (2021). E-Glass/phenolic matrix/APP laminate as a potential candidate for battery casing of e-vehicle - experimental investigations. Materials Research Express, 8(4) doi:10.1088/2053-1591/abf8e5
23. Parasuraman, S., Elamvazuthi, I., Kanagaraj, G., Natarajan, E., & Pugazhenthi, A. (2021). Assessments of process parameters on cutting force and surface roughness during drilling of aa7075/tib2 in situ composite. Materials, 14(7) doi:10.3390/ma14071726
24. Palani Kumar, K., Keshavan, D., Natarajan, E., Narayan, A., Ashok Kumar, K., Deepak, M., & Freitas, L. I. (2021). Evaluation of mechanical properties of coconut flower cover fibre-reinforced polymer composites for industrial applications. Progress in Rubber, Plastics and Recycling Technology, 37(1), 3-18. doi:10.1177/1477760619895011
25. Raghavendran, H. R. B., Natarajan, E., Mohan, S., Krishnamurithy, G., Murali, M. R., Parasuraman, S., . . . Kamarul, T. (2021). The functionalization of the electrospun PLLA fibrous scaffolds reduces the hydrogen peroxide induced cytokines secretion in vitro. Materials Today Communications, 26 doi:10.1016/j.mtcomm.2020.101812
26. Natarajan, E., Chia, K. Y., Faudzi, A. A. M., Lim, W. H., Ang, C. K., & Jafaari, A. (2021). Bio inspired salamander robot with pneu-net soft actuators ¨C design and walking gait analysis. Bulletin of the Polish Academy of Sciences: Technical Sciences, 69(3) doi:10.24425/bpasts.2021.137055
27. Prakash, S., Sasikumar, R., Natarajan, E., & Suresha, B. (2020). Influence of feeding techniques in bottom tapping stir casting process for fabrication of alumina nano-filler-reinforced aluminium composites. Transactions of the Indian Institute of Metals, 73(5), 1265-1272. doi:10.1007/s12666-020-01975-z
28. Prince Jeya Lal, L., Ramesh, S., Parasuraman, S., Natarajan, E., & Elamvazuthi, I. (2019). Compression after impact behaviour and failure analysis of nanosilica-toughened thin epoxy/gfrp composite laminates. Materials, 12(19) doi:10.3390/ma12193057
29. Kosalishkwaran, G., Parasuraman, S., Singh, D. K. J., Natarajan, E., Elamvazuthi, I., & George, J. (2019). Measurement of range of motions of L3-L4 healthy spine through offsetting reflective markers and in silico analysis of meshed model. Medical and Biological Engineering and Computing, 57(10), 2305-2318. doi:10.1007/s11517-019-02026-6
30. Kaviarasan, V., Venkatesan, R., & Natarajan, E. (2019). Prediction of surface quality and optimization of process parameters in drilling of delrin using neural network. Progress in Rubber, Plastics and Recycling Technology, 35(3), 149-169. doi:10.1177/1477760619855078
31. Baig, S., Azizan, A. H. S., Raghavendran, H. R. B., Natarajan, E., Naveen, S., Murali, M. R., . . . Kamarul, T. (2019). Effect of chitosan nanoparticle-loaded thymus serpyllum on hydrogen peroxide-induced bone marrow stromal cell damage. Stem Cells International, 2019 doi:10.1155/2019/5142518
32. Lazar, P. J. L., Sengottuvelu, R., & Natarajan, E. (2018). Assessments of secondary reinforcement of epoxy matrix-glass fibre composite laminates through nanosilica (SiO2). Materials, 11(11) doi:10.3390/ma11112186
33. Suresh, S., Venkatesan, K., & Natarajan, E. (2018). Influence of SiC nanoparticle reinforcement on FSS welded 6061-T6 aluminum alloy. Journal of Nanomaterials, 2018 doi:10.1155/2018/7031867
34. Elango, N., Gupta, N. S., Jiun, Y. L., & Golshahr, A. (2017). The effect of high loaded multiwall carbon nanotubes in natural rubber and their nonlinear material constants. Journal of Nanomaterials, 2017 doi:10.1155/2017/6193961
35. Sathiyamoorthy, V., Sekar, T., & Elango, N. (2015). Optimization of processing parameters in ECM of die tool steel using nanofluid by multiobjective genetic algorithm. Scientific World Journal, 2015 doi:10.1155/2015/895696
36. Elango, N., Faudzi, A. A. M., Hassan, A., & Rusydi, M. R. M. (2014). Experimental investigations of skin-like material and computation of its material properties. International Journal of Precision Engineering and Manufacturing, 15(9), 1909-1914. doi:10.1007/s12541-014-0545-0
37. Natarajan, E., Santhosh, M. S., Markandan, K., Sasikumar, R., Saravanakumar, N., & Dilip, A. A. (2022). Mechanical and wear behaviour of PEEK, PTFE and PU: Review and experimental study. Journal of Polymer Engineering, 42(5), 407-417. doi:10.1515/polyeng-2021-0325
38. Davani, N. M. P. K., Natarajan, E., Hanumandarao, B. R., & Paramasivam, S. (2021). Mechanical integrity of PEEK bone plate in internal fixation of femur: Experimental and finite element analysis towards performance measurement. International Journal of Enterprise Network Management, 12(1), 17-31. doi:10.1504/IJENM.2021.112663
39. Debnath, S. K., Omar, R., Latip, N. B. A., Shelyna, S., Nadira, E., Melor, C. K. N. C. K., . . . Natarajan, E. (2019). A review on graph search algorithms for optimal energy efficient path planning for an unmanned air vehicle. Indonesian Journal of Electrical Engineering and Computer Science, 15(2), 743-750. doi:10.11591/ijeecs.v15.i2.pp743-749
40. Prakash, S., Sasikumar, R., & Natarajan, E. (2018). Superior material properties of hybrid filler-reinforced aluminum MMC through double-layer feeding technique adopted in bottom tapping stir casting. High Temperature Material Processes, 22(4), 249-258. doi:10.1615/HighTempMatProc.2018028877
41. Ramesh, S., Prabu, R., & Natarajan, E. (2018). Experimental investigation of structure, wear, and erosion resistance of ss316 substrate coated with TiC¨CAl2O3 composite by laser cladding. High Temperature Material Processes, 22(1), 63-71. doi:10.1615/HighTempMatProc.2018027036
42. Natarajan, E., Solihin, M. I., & Chong, J. H. (2017). Grasp stability analysis of an isotropic direct driven three-finger soft robot hand. International Journal on Advanced Science, Engineering and Information Technology, 7(5), 1627-1631. doi:10.18517/ijaseit.7.5.2526
43. Viswanathan, R., Ramesh, S., Elango, N., & Kamesh Kumar, D. (2017). Temperature measurement and optimisation in machining magnesium alloy using RSM and ANOVA. Pertanika Journal of Science and Technology, 25(1), 255-262. Retrieved from www.scopus.com
44. Sathiyamoorthy, V., Sekar, T., Suresh, P., Vijayan, R., & Elango, N. (2015). Optimization of processing parameters in electrochemical machining of aisi 202 using response surface methodology. Journal of Engineering Science and Technology, 10(6), 780-789. Retrieved from www.scopus.com
45. Suresh, P., Venkatesan, R., Sekar, T., Elango, N., & Sathiyamoorthy, V. (2014). Optimization of intervening variables in MicroEDM of SS 316L using a genetic algorithm and response-surface methodology. Strojniski Vestnik/Journal of Mechanical Engineering, 60(10), 656-664. doi:10.5545/sv-jme.2014.1665
46. Nordin, I. N. A. M., Faudzi, A. A. M., Razif, M. R. M., Natarajan, E., Wakimoto, S., & Suzumori, K. (2014). Simulations of two patterns fiber weaves reinforced in rubber actuator. Jurnal Teknologi (Sciences and Engineering), 69(3), 133-138. Retrieved from www.scopus.com
47. Azman, M. A., Faudzi, A. A. M., Mustafa, N. D., Osman, K., & Natarajan, E. (2014). Integrating servo-pneumatic actuator with ball beam system based on intelligent position control. Jurnal Teknologi (Sciences and Engineering), 69(3), 73-79. doi:10.11113/jt.v69.3146
48. Natarajan, E., Razif, M. R. M., Faudzi, A. A. M., & Palanikumar, K. (2020). Evaluation of a suitable material for soft actuator through experiments and FE simulations. International Journal of Manufacturing, Materials, and Mechanical Engineering, 10(2), 64-76. doi:10.4018/IJMMME.2020040104
49. Ramesh, S., Vijayakumar, N., & Natarajan, E. (2020). Electrical discharge machining analysis of zirconium powder mixed dielectric on performance of high carbon high chromium steel. Journal of the Balkan Tribological Association, 26(1), 165-192. Retrieved from www.scopus.com
50. Suresh, S., Venkatesan, K., Natarajan, E., Rajesh, S., & Lim, W. H. (2019). Evaluating weld properties of conventional and swept friction stir spot welded 6061-t6 aluminium alloy. Materials Express, 9(8), 851-860. doi:10.1166/mex.2019.1584
51. Nagarajan, P., Murugesan, P. K., & Natarajan, E. (2019). Optimum control parameters during machining of LM13 aluminum alloy under dry electrical discharge machining (EDM) with a modified tool design. Medziagotyra, 25(3), 270-275. doi:10.5755/j01.ms.25.3.20899
52. Lu, B., & Natarajan, E. (2022). Research on data mining and bioinformatics in breast cancer prediction. Paper presented at the Proceedings of SPIE - the International Society for Optical Engineering, , 12168 doi:10.1117/12.2631122 Retrieved from www.scopus.com
53. Cheng, W. -., Ang, K. M., Choi, Z. C., Lim, W. H., Tiang, S. S., Natarajan, E., . . . Khan, M. K. A. A. (2022). Particle swarm optimization with modified initialization scheme for numerical optimization, Lecture Notes in Electrical Engineering doi:10.1007/978-981-16-8690-0_45 Retrieved from www.scopus.com
54. Ang, K. M., Lim, W. H., Tiang, S. S., Ang, C. K., Natarajan, E., & Ahamed Khan, M. K. A. (2022). Optimal training of feedforward neural networks using teaching-learning-based optimization with modified learning phases, Lecture Notes in Electrical Engineering doi:10.1007/978-981-16-2406-3_65 Retrieved from www.scopus.com
55. Manoharan, V., Tamilperuvalathan, S., Natarajan, E., & Ponnusamy, P. (2022). Experimental investigation on electrochemical discharge machining of zirconia, Lecture Notes in Mechanical Engineering doi:10.1007/978-981-16-4222-7_4 Retrieved from www.scopus.com
56. Muthusamy, K., Gunasegaran, H. R., Natarajan, E., & Renganathan, K. (2021). Analysis of potential project work accidents: A case study of a construction project in malaysia. Paper presented at the 2021 IEEE European Technology and Engineering Management Summit, E-TEMS 2021 - Conference Proceedings, 21-26. doi:10.1109/E-TEMS51171.2021.9524866 Retrieved from www.scopus.com
57. Elashmawy, A. M. A., Elamvazuthi, I., Ali, S. S. A., Natarajan, E., & Paramasivam, S. (2021). A hybridized pre-processing method for detecting tuberculosis using deep learning. Paper presented at the International Conference on Intelligent and Advanced Systems: Enhance the Present for a Sustainable Future, ICIAS 2021, doi:10.1109/ICIAS49414.2021.9642622 Retrieved from www.scopus.com
58. Natarajan, E., Hassan, C. S., Chun Kit, A., Santhosh, M. S., Ramesh, S., & Sasikumar, R. (2021). Modeling of multiwall carbon nanotubes reinforced natural rubber for soft robotic applications - A comprehensive presentation. Paper presented at the Materials Today: Proceedings, , 46 3251-3258. doi:10.1016/j.matpr.2020.11.293 Retrieved from www.scopus.com
59. Natarajan, E., In¨¢cio Freitas, L., Rui Chang, G., Abdulaziz Majeed Al-Talib, A., Hassan, C. S., & Ramesh, S. (2021). The hydrodynamic behaviour of biologically inspired bristled shark skin vortex generator in submarine. Paper presented at the Materials Today: Proceedings, , 46 3945-3950. doi:10.1016/j.matpr.2021.02.471 Retrieved from www.scopus.com
60. Muthusamy, K., Mahendran, R., & Natarajan, E. (2020). Development of effective water cleaning process methods for F&B water filtration system. Paper presented at the IOP Conference Series: Earth and Environmental Science, , 551(1) doi:10.1088/1755-1315/551/1/012001 Retrieved from www.scopus.com
61. Ang, K. M., Lim, W. H., Isa, N. A. M., Tiang, S. S., Ang, C. K., Natarajan, E., & Solihin, M. I. (2020). A constrained teaching-learning-based optimization with modified learning phases for constrained optimization. Journal of Advanced Research in Dynamical and Control Systems, 12(4 Special Issue), 1442-1456. doi:10.5373/JARDCS/V12SP4/20201623
62. Suresh, S., Venkatesan, K., Natarajan, E., & Rajesh, S. (2020). Influence of tool rotational speed on the properties of friction stir spot welded AA7075-T6/Al2O3 composite joint. Paper presented at the Materials Today: Proceedings,, 27 62-67. doi:10.1016/j.matpr.2019.08.220 Retrieved from www.scopus.com
63. Natarajan, E., Venkataramanan, A. R., Sasikumar, R., Parasuraman, S., & Kosalishkwaran, G. (2019). Dynamic analysis of compliant LEG of a stewart-gough type parallel mechanism. Paper presented at the 2019 IEEE Student Conference on Research and Development, SCOReD 2019, 123-128. doi:10.1109/SCORED.2019.8896335 Retrieved from www.scopus.com
64. Natarajan, E., Ang, C. T., Lim, W. H., Kosalishkwaran, G., Ang, C. K., & Parasuraman, S. (2019). Design topology optimization and kinematics of a multi-modal quadcopter and quadruped. Paper presented at the 2019 IEEE Student Conference on Research and Development, SCOReD 2019, 214-218. doi:10.1109/SCORED.2019.8896247 Retrieved from www.scopus.com
65. Sharon, H., Elamvazuthi, I., Lu, C. K., Parasuraman, S., & Natarajan, E. (2019). Classification of rheumatoid arthritis using machine learning algorithms. Paper presented at the 2019 IEEE Student Conference on Research and Development, SCOReD 2019, 345-350. doi:10.1109/SCORED.2019.8896344 Retrieved from www.scopus.com
66. Balaguru, S., Natarajan, E., Ramesh, S., & Muthuvijayan, B. (2019). Structural and modal analysis of scooter frame for design improvement. Paper presented at the Materials Today: Proceedings, , 16 1106-1116. doi:10.1016/j.matpr.2019.05.202 Retrieved from www.scopus.com
67. Solihin, M. I., Natarajan, E., Ang, C. K., & Khan, M. K. A. A. (2018). Observation on multivariable regression methods for various near infrared spectra data. Paper presented at the 2018 IEEE 4th International Symposium in Robotics and Manufacturing Automation, ROMA 2018, doi:10.1109/ROMA46407.2018.8986725 Retrieved from www.scopus.com
68. Natarajan, E., Hong, L. W., Ramasamy, M., Hou, C. C., & Sengottuvelu, R. (2018). Design and development of a robot gripper for food industries using coanda effect. Paper presented at the 2018 IEEE 4th International Symposium in Robotics and Manufacturing Automation, ROMA 2018, doi:10.1109/ROMA46407.2018.8986699 Retrieved from www.scopus.com
69. Ramasamy, M., Solanki, S. G., Natarajan, E., & Keat, T. M. (2018). IoT based smart parking system for large parking lot. Paper presented at the 2018 IEEE 4th International Symposium in Robotics and Manufacturing Automation, ROMA 2018, doi:10.1109/ROMA46407.2018.8986731 Retrieved from www.scopus.com
70. Ramaswamy, R., Selvam, B., Marimuthu, P., & Natarajan, E. (2018). Influence of yttrium oxide nanoparticles in TI6AL4V matrix on compressive and hardness behaviour. International Journal of Mechanical Engineering and Technology, 9(9), 1140-1146. Retrieved from www.scopus.com
71. Prince Jeya Lal, L., Ramesh, S., & Natarajan, E. (2018). Study on the repeatability of manufacturing nano-silica (SiO2) reinforced composite laminates. Paper presented at the IOP Conference Series: Materials Science and Engineering, , 346(1) doi:10.1088/1757-899X/346/1/012083 Retrieved from www.scopus.com
72. Ramaswamy, R., Selvam, B., Marimuthu, P., & Elango, N. (2018). Investigation of densification behaviour on yttrium oxide reinforced ti-6al-4v nano-composite through powder metallurgy. International Journal of Mechanical and Production Engineering Research and Development, 8(2), 433-442. doi:10.24247/ijmperdapr201849
73. Golshahr, A., Natarajan, E., Santhosh, M. S., Sasikumar, R., Ramesh, S., & Durairaj, R. (2018). Multi wall carbon nanotube reinforced silicone for aerospace applications. International Journal of Mechanical and Production Engineering Research and Development, 8(4), 775-784. doi:10.24247/IJMPERDAUG201880
74. Balaguru, S., Navin Kumar, K., & Natarajan, E. (2018). Experimental and numerical investigation on mechanical properties of AA6061T6 reinforced with SiC and Al2O3. International Journal of Mechanical and Production Engineering Research and Development, 2018(Special Issue), 201-206. Retrieved from www.scopus.com
75. Thamizhmanii, S., Hasan, S., & Natarajan, E. (2017). Performance of tool wear using cryogenic treated CBN inserts. Paper presented at the Lecture Notes in Engineering and Computer Science, , 2230 792-796. Retrieved from www.scopus.com
76. Razif, M. R. M., Faudzi, A. A. M., Bavandi, M., Nordin, N. A. M., Natarajan, E., & Yaakob, O. (2014). Two chambers soft actuator realizing robotic gymnotiform swimmers fin. Paper presented at the 2014 IEEE International Conference on Robotics and Biomimetics, IEEE ROBIO 2014, 15-20. doi:10.1109/ROBIO.2014.7090300 Retrieved from www.scopus.com
77. Muhammad, R. M. R., Elango, N., Ili, N. A. M. N., & Mohd Faudzi, A. A. (2014). Non-linear finite element analysis of biologically inspired robotic fin actuated by soft actuators, Applied Mechanics and Materials doi:10.4028/www.scientific.net/amm.528.272 Retrieved from www.scopus.com
78. Elango, N., Faudzi, A. A. M., Rusydi, M. R. M., & Nordin, I. N. A. M. (2014). Determination of non-linear material constants of RTV silicone applied to a soft actuator for robotic applications, Key Engineering Materials doi:10.4028/www.scientific.net/KEM.594-595.1099 Retrieved from www.scopus.com
79. Sivakumar, S., Ragunathan, S., & Elango, N. (2014). Design and optimization analysis of 5 kWe downdraft gasifier. Journal of Chemical and Pharmaceutical Sciences, 2014-December, 141-143. Retrieved from www.scopus.com
80. Natarajan, E., Mohd Faudzi, A. A., Jeevanantham, V. M., Muhammad Razif, M. R., & Mohd Nordin, I. N. A. (2013). Numerical dynamic analysis of a single link soft robot finger doi:10.4028/www.scientific.net/AMM.459.449 Retrieved from www.scopus.com
81. Mohd Nordin, I. N. A., Muhammad Razif, M. R., Faudzi, A. M., Natarajan, E., Iwata, K., & Suzumori, K. (2013). 3-D finite-element analysis of fiber-reinforced soft bending actuator for finger flexion. Paper presented at the 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics: Mechatronics for Human Wellbeing, AIM 2013, 128-133. doi:10.1109/AIM.2013.6584080 Retrieved from www.scopus.com
82. Elango, N., Onubogu, N. O., & Ragunathan, S. (2012). Experimental study of non-contact robot gripper for food industries, Applied Mechanics and Materials doi:10.4028/www.scientific.net/AMM.232.392 Retrieved from www.scopus.com
83. Natarajan, E., & Onubogu, N. O. (2012). Application of coanda effect in robots - A review, Advances in Intelligent and Soft Computing doi:10.1007/978-3-642-27329-2_56 Retrieved from www.scopus.com
84. Elango, N., & Marappan, R. (2008). The fundamental deformation effect of a robot soft finger with layered structure during power grasping. Paper presented at the 39th International Symposium on Robotics, ISR 2008, 826-830. Retrieved from www.scopus.com
- Best research article, IEEE/ROMA International Conference: Design and development of a robot gripper for food industries using Coanda effect (2018).
- Outstanding IEEE Volunteer Award, IEEE/RAS Malaysia (2019, 2021)
- Outstanding Medium Chapter Award for IEEE/RAS for 2 consecutive years of 2018 and 2019, 2017-2018 and 2018-2019
- Top Researcher Award, Â鶹´«Ã½Ó³» University (2022)